Koenic KTO 110 Mode D'emploi page 24

Using roll attachment
Use only the roll attachment included.
1. Set the roll attachment by placing the
supporting feet into the toasting slot
2. Lay the rolls on the roll attachment.
3. Select a medium toasting level with
the selector and press the control lever
downwards.
4. Turn the rolls occasionally.
Caution
In order to prevent damages to the product,
never lay the rolls directly on the bread slots.
Note
The feet of the roll attachment is fixed,
please do not try to fold or press it.
Clean crumb tray
Regularly remove the crumb tray from the
device and remove the crumbs.
1. Unplug and let the toaster cool down.
2. Pull out the crumb tray and remove the
crumbs.
3. Wipe the crumb tray with a slightly damp
cloth if there are heavy stains.
4. Re-insert the crumb tray.
Caution
Never use the toaster without the crumb
tray.
Note
Be sure to re-insert the crumb tray into the
device properly.
Set both feet of the
roll attachment into
the slot
Note: Never put the
feet out of the slot
Set roast level.
Unplug the toaster.
Re-insert the crumb
tray after cleaning.
EN
Lay the rolls on.
Start toasting.
Pull out the crumb
tray.
23