Safety Instructions - Koenic KTO 110 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34

Safety instructions

• Read this manual before first use
thoroughly. It contains important
information for your safety as well
as for the use and maintenance
of the equipment. Keep these
instructions for future reference and
pass it on with the product.
• Pay particular attention to the
warnings on the product and in this
instruction manual.
• Use the product only for its intended
purpose. Improper use may lead to
hazards.
• In the event of improper use or
wrong operation, we do not accept
any liability for resulting damages.
• The use of accessories and
components not expressly
recommended by the manufacturer
may result in injuries or damages and
voids the warranty.
• Never leave the product
unsupervised while it is switched on.
• Do not place heavy objects on top of
the product.
• Never immerse electrical parts of the
product in water during cleaning or
operation. Never hold the product
under running water.
• Do not under any circumstances
attempt to repair the product
yourself. For servicing and repairs,
please consult an authorised service
agent.
• The mains voltage must match the
information on the rating label of the
product.
• The power plug is used as the
disconnect device. Please be sure
that the power plug is in operable
condition.
• Only unplug from the power socket
can separate the product completely
from the mains.
• Avoid damages to the power cord
that may be caused by kinks or
contact with sharp corners.
• Keep this product including power
cord and power plug away from all
heat sources like for example, ovens,
hot plates and other heat-producing
devices/objects.
• Only unplug from the power socket
by the plug itself. Do not pull on the
cord.
• Unplug the product when the
product is not in use, in case of
malfunctions, prior to attaching or
removing accessories and prior to
each cleaning.
• If the power cord or the casing of
the product is damaged or if the
product is dropped, the product may
not be used before it is examined by
an authorised service agent.
EN
19

Publicité

Table des Matières
loading

Table des Matières