• ELECTRICAL CONNECTION
The hot plates must be connected to a socket that has been installed correctly and
o
earthed. The socket must have a 10 amp fuse. The power cable must not hang down
or come into contact with the hot plates. Power cables of other electrical appliances
must also not come into contact with the cooking plates.
• BEFORE STARTING THE APPLIANCE
o
Only place the appliance on level, heat resistant surfaces.
o
Before using the hot plates for the first time, turn the hobs on to maximum for about
5 minutes without placing a pan on the top, so that the protective layer can burn off.
This protects the hob against rust. Ventilate the room well when you do this. The
smoke that comes off is completely normal and will not happen again in normal use.
o
The bottom of any pots and pans you use must be clean and dry.
• HOW TO USE THE SETTINGS
o
The hot plates are switched on and controlled using the thermostat knob. First place
the pan on the hot plate and then switch it on. To cook the contents quickly adjust
the knob to the highest setting. When you reach boiling point, turn the knob back
down to a lower setting. After you have finished, pull the plug out.
• PANS AND COOKWARE
o
Only use cookware that has a flat bottom and with a width that will fit on the hot
plate. If the pan is too wide or uneven, it will take longer to cook the contents and
use more electricity. Always choose pans that are big enough to cover the hot plate
so nothing can spill out and get stuck to it.
• CLEANING AND CARE
o
Before cleaning the hot plates always pull the plug out and let the appliance cool
down. Never immerse the appliance in water!
o
Wipe up any food that has spilled out with a damp cloth and some washing up liquid.
o
Never use any abrasive cleaning agents or scouring pads.
Regularly apply a commercially available care product to ensure the appliance
o
remains rustproof.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
27