Table des Matières
Publicité
Contenu de l'emballage
Barre de son
Câble audio RCA
Caractéristiques
Partie supérieure
N° Élément
Description
Témoin de
1
marche-arrêt
2
Indicateur de
la source
3
Touche
Appuyer sur cette touche pour mettre la barre de son sous tension. Appuyer de
(marche-arrêt)
nouveau sur cette touche pour mettre la barre de son en mode attente.
Télécommande
Adaptateur c.a.
• S'allume en rouge quand la barre de son est en mode attente.
• Clignote en rouge quand la barre de son est mise en sourdine.
• S'éteint lorsque l'appareil est sous tension.
• Vert : source optique
• Orange : source RCA
• Bleu : source Bluetooth (clignote lorsqu'en mode de couplage)
• Violet : DSP (Processeur de signaux numériques) sélectionné (sur la
télécommande)
• Clignote : lors du réglage du volume. S'allume en continu quand le niveau du
son maximal ou minimal est atteint.
www.insigniaproducts.com
Barre de son mini à 2.0 canaux avec Bluetooth
PACKAGE CONTENTS
QUICK SETUP GUIDE
Mini 2.0 Soundbar
Soundbar
Quick Setup Guide
with Bluetooth
NS-SB216
AC adapter
3.5 mm to
Remote control
RCA adapter
FIND YOUR USER GUIDE ONLINE!
Go to www.insigniaproducts.com, then click Support & Service.
Enter NS-SB216 in the box under Manual, Firmware, Drivers &
Product Information, then click ►.
FEATURES
Top view
#
DESCRIPTION
FUNCTION
1
Power indicator
• Lights red when the soundbar is in standby mode.
• Blinks red when the soundbar is muted.
2
Source indicator
• Green: Optical source
• Orange: RCA source
• Blue: Bluetooth source (blinks when in pairing mode)
• Purple: DSP selected (on remote)
Back view
• Flashes: when adjusting volume. Turns solid when the maximum or
minimum sound level is reached.
3
(Power) button
(Source) button
Press repeatedly to cycle through the available sound sources:
4
• Optical
• RCA
• Bluetooth
5
VOL +/– buttons
Press to increase or decrease the volume of the soundbar.
6
RCA
(R and L) jacks
If your TV (or other audio source device) has RCA out jacks, connect the
Remote control
RCA cables to your source device and these jacks.
OPTICAL (input) jack
If your TV (or other audio source device) has an optical out jack, connect
7
a digital optical cable (not included) to your source device and this jack.
8
DC IN jack
Connect the AC adapter to this jack to power the soundbar.
9
(Power) button
10
SOURCE buttons
Press to select the sound source. Select Optical, RCA, or Bluetooth.
(Mute) button
Press to mute the sound from the soundbar. Press again to restore the
11
sound.
12
VOL +/– buttons
Press to increase or decrease the volume of the soundbar.
13
DSP buttons
Press to select the Digital Signal Processor (DSP) sound mode:
• Standard: Lets you enjoy normal sound.
• Theater: Best for enjoying movies. Bass frequencies are enhanced.
• News: Select for clear voice reproduction.
RMC-SB216
Before using your new product, please read these instructions to prevent any damage.
Guide d'installation rapide
Adaptateur 3,5 mm vers RCA
CONNECTING THE SOUNDBAR
CONNECTING THE AC ADAPTER
Look at the back of your sound source device, such as a TV, DVD/Blu-ray player, or cable box, to
Cautions:
•
Make sure that the electrical outlet matches the AC adapter's input requirements of 100-240 V, 50/60 Hz before
connecting.
You can connect several devices and switch the sound source as required.
Note:
•
Use only the AC adapter provided.
•
Plug in the AC adapter only after all other connections have been made.
1 Connect the AC adapter to the DC IN jack on the back of the soundbar.
AUDIO QUALITY
JACK TYPE (on source device)
CABLE
2 Plug the other end of the AC adapter into a power outlet or surge protector.
BEST
Digital optical cable (not included)
RCA audio cable
Back of the soundbar
GOOD
RCA audio cable (included)
GOOD
3.5 mm audio cable (adapter included)
- PICK ONE -
TV or DVD/Blu-ray
Digital connections (BEST)
player
Back of the soundbar
1 Connect one end of the digital optical cable (not included)
to the OPTICAL jack on your soundbar.
2 Connect the other end into the digital optical output port
on your audio source device.
3 Change the device's audio output to 'PCM' format (typically
found in audio settings). Refer to the documentation that
came with your audio source device for more information.
Pairing your devices
1 Turn on your soundbar.
Digital optical cable
2 Place your Bluetooth device within 30 ft. (10 m) of your soundbar.
(not included)
3 Press the (Bluetooth) button on the remote control or the
- OR -
select Bluetooth mode. The LED blinks blue.
B
c a
o k
h t f
s e
u o
d n
r a b
T
o V
D r
D V
B /
- u l
y a r
a l p
r e y
4 Navigate to your device's Bluetooth settings, turn on Bluetooth, then search for available devices. For
RCA connection (GOOD)
additional information on pairing your device, refer to your devices' documentation.
1 Connect one end of the RCA audio cable to the RCA ports
5 On your Bluetooth device, select "NS-SB216" from the device list. Repeat steps 1-4 if "NS-SB216" is not
on your soundbar.
displayed.
2 Connect the other end into the RCA audio OUTPUT ports
6 If a PIN code is requested, enter "0000."
on your audio source device.
7 When pairing is completed the LED lights solid blue.
Note: Make sure that the cable ends match the color of the
Notes:
ports.
•
Some devices, such as an iPhone, connect immediately after pairing so the Bluetooth indicator on your
soundbar remains on. Other devices, such as notebook computers, may ask you if you wish to connect. In this
instance, the Bluetooth indicator continues to blink until a connection is established.
RCA audio cable (included)
•
Your soundbar saves pairing information for up to eight devices. However, it can only be connected and play
content from one device at a time.
- OR -
•
When you turn on your soundbar, it automatically connects to the last connected device if that device is in
TV or
3.5mm to RCA adapter
3.5 mm connection (GOOD)
DVD/Blu-ray
(included)
and manually connect to the other paired device.
player
1 Connect one end of the RCA audio cable connectors
to your soundbar, then connect the other end to the
Disconnecting your devices
3.5 mm to RCA adapter (included).
2
Plug the other 3.5 mm male end of the adapter into
Back of the
the headphone or AUX Output on your audio source
Note: For more information about using Bluetooth, see the online User Guide.
device.
soundbar
RCA audio cable (included)
AC wall plug
AC adapter
(source) button on the soundbar to
OVER
5
Publicité
Table des Matières
