Troubleshooting; After-Sales Service - sauter SHD 1389 X Guide D'installation Et D'utilisation

EN

5 / TROUBLESHOOTING

SYMPTOMS
The hood is not working...
The hood is not operating effectively...
The hood stopped working
EN

6 / AFTER-SALES SERVICE

Any maintenance on your equipment should be undertaken by:
- either your dealer,
- or another qualifi ed mechanic who is an authorized agent for the brand appliances.
When making an appointment, state the full reference of your equipment (model, type and
serial number). This information appears on the manufacturer's nameplate attached to your
equipment.
SOLUTIONS
Ensure that:
• The power is not cut off.
• A speed has been selected.
Ensure that:
• The selected motor speed is suffi cient
for the quantity of smoke and vapours to
be cleared.
• The kitchen is suffi ciently ventilated to
allow for fresh air intake.
• The carbon fi lter is not worn (hood
operating in recycling mode).
Ensure that:
• The power is not cut off.
• The single-pole cut-off device was not
activated.
23