Before Use; Instructions For Use; After Use - Rotel U1961CH Mode D'emploi

 BEFORE USE
o
Caution: Remove the protective films before using the oven. Position the oven cor-
rectly and make sure all the settings are on "0".
o
Only connect the mains plug if the mains voltage corresponds to the voltage specified
on the rating label.
o
The heating elements are coated with a protective coating, which must be removed
before use. To do this, turn switch (2) to position
set the temperature (1) to 200°C. Set the Timer (4) to around 15 minutes and leave
the the oven on for the same amount of time.

N.B.: Whilst you are burning off the coating, make sure the room is well venti-
lated as there can be a build up of smoke and a strong smell at the beginning.

Next turn the oven off and let it cool down.

When it is completely cooled, clean the inside with a damp cloth.

Make sure that the oven is completely dry before you use it.
 INSTRUCTIONS FOR USE
o
Turn the settings knob (2) to the position you want.
o
Using the thermostatic knob (1), you can select from a temperature range of between
100°C and 230°C.
o
Use the Timer (4) to set the cooking time you want.
o
The oven is now switched on! (The oven only works when the Timer is set).
o
The indicator light (3) lights up as soon as the Timer has been set.
 AFTER USE
o
The appliance will switch off automatically after the set time has elapsed.
o
Pull the plug out of the socket.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
, open the oven door (6) and
17