Noise/Vibration Information - Bosch AHS 48 LI Notice Originale

OBJ_BUCH-564-009.book Page 16 Monday, December 15, 2014 3:33 PM
16 | English
Cordless Hedgecutter
Capacity
– 2 607 336 039
– 2 607 336 207
– 2 607 336 921
Number of battery cells
– 2 607 336 039
– 2 607 336 207
– 2 607 336 921
Operating duration per battery-pack charge
(2.0 Ah)
Battery Charger
Article number
Charging current
Allowable charging temperature range
Charging period (battery discharged)
– 1.3 Ah
– 1.5 Ah
– 2.0 Ah
Weight according to EPTA-Procedure 01/2003
Protection class
Battery Charger
Article number
Charging current
Allowable charging temperature range
Charging period (battery discharged)
– 1.3 Ah
– 1.5 Ah
– 2.0 Ah
Weight according to EPTA-Procedure 01/2003
Protection class

Noise/Vibration Information

Sound emission values determined according to
EN 60745-2-15.
Typically the A-weighted noise levels of the product are:
Sound pressure level 66 dB(A); sound power level 87 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
a =2.5 m/s , K=1.5 m/s .
h
F 016 L81 255 | (15.12.14)
AHS 48 LI
Ah 1.3
Ah 1.5
Ah 2.0
min 75
AL 2215 CV
EU 2 607 225 471
UK 2 607 225 473
AU 2 607 225 475
mA 1500
°C 0– 45
min 55
min 63
min 85
kg 0.4
/ II
AL 2204 CV
EU 2 607 225 273
UK 2 607 225 275
AU 2 607 225 277
mA 430
°C 0– 45
min 180
min 207
min 290
kg 0.7
/ II
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
AHS 52 LI
1.3
1.5
2.0
5 5
5 5
5 5
75
AL 2215 CV
2 607 225 471
2 607 225 473
2 607 225 475
1500
0– 45
55
63
85
0.4
/ II
AL 2204 CV
2 607 225 273
2 607 225 275
2 607 225 277
430
0– 45
180
207
290
0.7
/ II
Bosch Power Tools