Declaration Of Conformity - TFA 60.3519 Mode D'emploi

TFA_No. 60.3519 Anleitung_12_14 22.12.2014
CORONA – Radio-controlled wall clock with light
8. Troubleshooting
Problems Solution
➜ Ensure that the battery for the movement is inserted with correct polarity
No hand movement
➜ Change the battery for the movement
➜ Ensure that the batteries for the backlight are inserted with correct
No backlight
polarity
➜ Change the batteries for the backlight
➜ Connect the power adapter
➜ Move the switch to position ON
➜ Check whether shadow or light affect the light sensor
(in position AUTO)
➜ Press and hold the WAVE button for three seconds and start the
No DCF reception
initialization manually
➜ Wait for attempted reception during the night
➜ Choose another place for your product
➜ Manual setting of the clock
➜ Check if there is any source of interference.
➜ Restart the radio-controlled clock according to the manual
➜ Use a pin to press the RESET button
Incorrect indication
➜ Change the battery for the movement
If your device fails to work despite these measures contact the supplier from whom you purchased it.
9. Waste disposal
This product has been manufactured using high-grade materials and components which can be re-
cycled and reused.
Never dispose of empty batteries and rechargeable batteries in household waste.
As a consumer, you are legally required to take them to your retail store or to an appro-
priate collection site depending on national or local regulations in order to protect the
environment.
The symbols for the heavy metals contained are: Cd=cadmium, Hg = mercury; Pb=lead
This instrument is labelled in accordance with the EU Waste Electrical and Electronic
Equipment Directive (WEEE
Please do not dispose of this instrument in household waste. The user is obligated to
take end-of-life devices to a designated collection point for the disposal of electrical
and electronic equipment, in order to ensure environmentally-compatible disposal.
10. Specifications
Power consumption:
Radio-controlled clock: Battery 1 x 1,5 V AA (not included)
Backlight: Batteries: 3 x 1,5 V AA (not included)
Battery life (Alkaline): About 100 days for 8 hours' illumination per day (Position AUTO)
Power adaptor DC 230V - 50HZ; 30mA 4,5 V 150mA (not included)
12
08:58 Uhr Seite 7
CORONA – Radio-controlled wall clock with light
Housing dimension: Ø 308 x 43 mm
Weight: 509 g (instrument only)
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim.
No part of this manual may be reproduced without written consent of TFA Dostmann. The technical data are correct at
the time of going to print and may change without prior notice. The latest technical data and information about your
product can be found by entering your product number on our homepage. www.tfa-dostmann.de

DECLARATION OF CONFORMITY

Herewith we declare, that this wireless transmission device does comply with the essentials requirements of R&TTE
Directive 1999/5/EC.
A copy of the signed and dated Declaration of Conformity is available on request via info@tfa-dostmann.de.
www.tfa-dostmann.de 12/14
13