Function And Features; Wiring Diagram - IFM Electronic ecomot200 T 700 Notice D'utilisation

MULTIFUNCTION RELAY

Function and features

The multifunction relay T 700 is a time-controlled switching amplifier for pnp-
switching sensors and speed monitors, but it can also be triggered by mechanical
contacts or push-buttons.
The switching of the output relay depending on the input signal can be influenced
via timers with different functions.
Functions
The output relay switches:
• ON delay
• OFF delay
• ON and OFF delay
• ON pulse
• OFF pulse
• delayed ON pulse
• delayed OFF pulse
The functions ON delay and OFF delay are active all the time. If one function is not
needed it must be set to the lowest value (approx. 250 ms).
Please note
If the T 700 in function "OFF pulse" is connected to the operating voltage this
causes a fleeting pulse of the output relay.

Wiring diagram

3-wire
sensors
pnp switching
mechanical contacts
or switches
page 8
T 700
signal
signal
2-wire
sensors
pnp switching
signal