Functional Description - Orbeco ET 730 Mode D'emploi

EN Functional description
Stirring Speed Knob
Turn the stirring speed knob on the front panel in order to start the stirring function . It is
possible to select the following speeds: 0 – 20 – 40 – 50 – 100 – 200 rpm
Timer
It's possible to select the time of running by the Timer knob on the front panel .
Turn counter-clockwise for continuous running or turn clockwise to select the time up to
30 minutes . At the end of the run time, the instrument stops automatically .
Lighting Column Switch
Turn on the light of central column by the switch .
Information regarding construction materials
Structure
Front panel label
Base
If any liquid being processed should fall onto the above materials, clean them immediately
to avoid chemical corrosion .
8
Steel
PET
NBR
Floc-Tester_ET730_1 06/2009