Functional Description; Power Switch - Orbeco Floc-Tester ET 740 Mode D'emploi

Functional description

GB

Power Switch

The power switch allows to turn the instrument on and off . If the switch is set to "OFF",
the instrument is off; if the switch is set to "ON", the instrument is on .
Pannel Lighting Switch
This switch allows to turn on the back lamp .
Electronic Timer Window
With the keys and the displays of this window (Set h and i) it's possible to select the
following modality of running:
• Continuous
• With time base. Up to 999 minutes
• With hours base. Up to 99 hours
Stirrer Speed Window
It's possible select the stirrer speed for the stirring rods by the keys and display of this
window (h and i) . It is possible to select speed from 10 to 300 rpm . The display shows the
stirring rods speed .
Information regarding construction materials
Structure
Frontal panel label
Foot
If any liquid being processed should fall onto the above materials, clean them immediately
to avoid chemical corrosion .
8
Steel
PET
NBR
Floc-Tester_ET740_ET750_1 12/2008