Getting Started; Operation; Operating Modes - Oregon Scientific RA123 Mode D'emploi

GETTING STARTED

RA123 uses 2 x CR2032 lithium battery, which has
already been installed. See below for battery warnings.
LOW BATTERY ICON
NOTE If you need to replace the battery, we highly
recommend you contact the retailer or our customer
service department.
To replace battery:
1. Use a Phillips screwdriver to unscrew the lid of the
battery compartment.
2. Remove the old battery and insert the new one
matching the polarities.
3. Replace the lid using a Phillips screwdriver, screw
until firmly in place.
NOTE When battery is replaced it is important to re-
calibrate the compass's magnetic sensor.
DESCRIPTION
The device battery is low.
NOTE While the low battery icon
instant altitude, maximum altitude, air pressure, sea level
pressure, temperature and compass values show " - - " . It
will return to normal once battery has been replaced.

OPERATION

OPERATING MODES

Press TIME to switch between:
Time mode
Press ALT/+, COMPASS, BARO/- to switch between:
Altimeter mode Compass mode
4
is displayed,
Date mode Alarm mode
Barometer mode