Assembly - Blackstone TAILGATER COMBO 1555 Manuel De L'utilisateur

WARNING:
The manufacturer has made every effort to eliminate any sharp edges. However, you
should handle all components with care to avoid accidental injury. Tools required: The only tool
needed is a Phillips Screwdriver for minimal assembly on the cover and main body handles.

ASSEMBLY:

Please read all instructions thoroughly before proceeding. Find a large, clean area in which to
assemble your BLACKSTONE Tailgater Combo. Please refer to the parts list and assembly diagram
as necessary. BLACKSTONE Tailgater Combo assembly involves large components; therefore, it is
advised to have two people set up the unit.
Make sure all the plastic protection is removed before assembling
NOTICE:
Step 1
Take out the main body, pull out the lever knob and unfold the legs.
Lever Knob
VIDEO ASSEMBLY
Watch an actual BLACKSTONE Tailgater assembly. Use a QR Code App
and scan the QR code to the left. You will be taken to the Tailgater
resource page.
You can also visit this page at www.blackstoneproducts.com/tailgater
15