Kenmore 110.2513410 Série Guide D'utilisation Et D'entretien page 6

SPIN
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin speed.
COMPLETE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
6
LID LOCKED
To allow for proper load sensing and spinning, the lid will lock
and the Lid Locked light will turn on. This light indicates that
the lid is locked and cannot be opened.
If you need to open the lid, press START/
PAUSE/Unlock Lid. The lid will unlock once
the washer movement has stopped. This may
take several minutes if the load was spinning
at high speed. Press START/PAUSE/Unlock
Lid again to resume the cycle.
NOTE: If you hold the button for 3 seconds, the cycle will
cancel and the water will drain.