Inputs / Outputs Connections; Symbols And Icons On The Display; Operation Of The Device - VIO OXY 70 Manuel D'utilisation

• Inputs / Outputs connections

Use original accessories guaranteed by the manufacturer only.
If necessary, contact your local distributor.
Micro USB port for
connection to PC and
power supply
READ THE MANUAL BEFORE PROCEEDING TO CONNECT THE PROBES OR PERIPHERALS

• Symbols and icons on the display

Symbol Description
M+
Number of data stored in Data Logger
mode on instrumental memory
Instrument connected to the
DataLink+ software
FIXED: Calibration deadline set for that
parameter
INTERMITTENT: Calibration deadline
active for that parameter
Measurement stability indicator
The bars scroll if the measurement is
not stable

Operation of the device

• After the switching on, the instrument enters measure mode in the last screen before turning off.
• To scroll through the different parameter screens, press the key
Sequence of parameters in measure mode:
Note: Pressing the button
first one.
UM Serie Oxy70Vio EN rev.0 28.05.2020
OXY 70 Vio top panel
Symbol
OXY 70 Vio
% O
2
mg/l
mbar
after the last parameter, the instrument automatically restarts from the
11
6 pin connector for
optical sensor
Description
Error in measurement or calibration
FIXED: Automatic Data Logger set
INTERMITTENT: Automatic Data
Logger in operation
Press the directional keys to
change the parameter or value on
the display
Battery charge indication
.
EN