Babboe City Instructions De Montage page 61

Step 9.2
INSTALLING THE REAR PANEL
PARTS
• Rear panel
• Sachet D
• Black caps
Hand-tighten the back panel of the box (with seatbelt holes) with the parts in sachet D,
including the black caps. This is where the bench will be installed at a later point. The rear
panel should only be hand-tightened for now (not tightly secured), in order for the box as
a whole to fit better.
Then attach the top part of the rear panel with the short bolts and ring nuts already
located in the wood.
37
TOOLS
• Phillips screwdriver
• Ring/open-ended spanner # 10
61