Setting The Time Manually - ADE CK 1703 Mode D'emploi

Setting the time manually

‚ If there is more than approx.
‚ Each push of a button is confirmed
1. Press and hold the SET button until the
indicator for the 12 and 24 hour time format
flashes in the display.
2. Use the
time format ("12H" or "24H").
3. Press SET to save the setting.
"00" flashes in the display for the time zone
you are in ("00" is the default setting for the
European mainland).
4. Proceed as described:
− Press the
desired value.
− Press SET each time to save a setting.
5. Perform the following settings one after the
other:
− Hours
− Minutes
− Year
− Month
DCF Radio-controlled alarm clock CK 1703
30 seconds between two pushes
of a button, the setting process
automatically ends and you will
have to repeat it.
with a beep.
or buttons to select the desired
or button to set the
35