SQuape E motion Manuel D'utilisation page 14

5.3 Filling the SQuape E[motion]
Before filling the Tank, please make sure
it is shift first in „closed" and then „refill"
mode. For this, twist the locking cap clock-
wise untill you feel a second resistance (3/4
turn). (fig. 1) After this, twist the locking
cap slightly counterclockwise untill the fil-
ling holes showing up. Now you are ready
to refill the tank by using a dropper bott-
le. (fig.2). After your refill twist the locking
cap counterclockwise untill you feel again a
second resistance. This brings your SQuape
E[motion] into „vape"-mode.
fig. 1
5.4 Exchanging the glass tank
Unscrew the topcap ring (counterclockwise)
and remove the chimney incl. locking cap
from the tank. Empty the tank completely
and rinse the tank with tepid, running water
- now you can remove the glass.
Please be careful when inserting a new
glass: check if the o-rings are not damaged
and correctly seated. After inserting the
glass and the o-rings, screw the topcap ring
14
fig. 2
back on the chimney. Make sure it is screwed
down well. Then place the chimney in the
tank and turn the topcap ring tight so that
the the topcap is well closed. Please lubrica-
te previously all o-rings with VG.
Caution: Do not apply too much force when
screwing off the topcap ring. Don't use pliers
or similar. Rubber gloves, rubber bands or
a „vape tweezer" will do the job perfectly.
5.5 Examples of possible coils
You'll find examples of different coils on our
website www.squape.ch, as well as links to
tutorials on YouTube or other sources.
5.6 Setting of the airfl ow control
The airflow control can be used for eit-
her single or dual coils. You can adjust the
airflow by twisting the ring slightly. If you
prefer a more restricted draw for mouth-
to-lung vape, you might use the air reducer
screw (MTL kit) which is included to this
packaging. Use a 2.5mm hex wrench to as-
semble this screw into the deck from below.
Different airhole sizes are available as an
accessory.
6. Accessories
Various accessories and spare parts are
available and we are constantly increasing
the range of parts. Please only use genuine
parts from StattQualm.