König Electronic CMP-WNROUT41 Mode D'emploi page 6

Key renewal Interval: Set the key's renewal period.
6.2.4 WPA- Enterprise
This security mode is used when a RADIUS server is connected to the device. Select "WPA-Enterprise" from
the drop-down menu to enter the following window:
Select SSID：Select the SSID (main SSID or minor SSID) to configure security settings from the
drop-down menu.
WPA Algorithms: Provides TKIP [Temporal Key Integrity Protocol] or AES [Advanced Encryption
Standard]. The default is TKIP mode.
Key Renewal Interval: Set the key's renewal period.
Radius Server: Enter the IP address of the Radius server.
Radius Server port: Enter the authentication port of the Radius server. The default is 1812.
Shared Secret: Enter the shared key for the authentication server with 8~63 ASCII characters.
Session Timeout: The authentication interval period between AP and authentication server.
6.2.5 WPA2-Enterprise
This security mode is based on Radius authentication server and WPA2 encryption method. WPA2 is used
when a RADIUS server is connected to the device. Select "WPA2-Enterprise" from the drop-down menu to
enter the following window:
Select SSID: Select the SSID (main SSID or minor SSID) to configure security settings from the
drop-down menu.
WPA Algorithms: Provides TKIP [Temporal Key Integrity Protocol] or AES [Advanced Encryption
Standard]. The default is TKIP mode.
Key Renewal Interval: Set the key's renewal period.
Radius Server: Enter the IP address of the Radius server.
Radius Server port: Enter the authentication port of the Radius server. The default is 1812.
Shared Secret: Enter the shared key for the authentication server with 8~63 ASCII characters.
Session Timeout: The authentication interval period between AP and authentication server. The default
is 3600s.
6.2.6 802.1X
This security mode is used when a RADIUS server is connected to the device. 802.1x, a kind of port-based
authentication protocol, is an authentication type and strategy for users. The port can be either a physical port
or logical port (such as VLAN). For wireless LAN users, a port is just a channel. The final purpose of 802.11x
authentication is to check if the port can be used. If the port is authenticated successfully, you can open this
port which allows all the messages to pass. If the port is not authenticated successfully, you can keep this port
"disabled" which allows only 802.1x authentication protocol messages to pass. Select "802.1x" from the
drop-down menu to enter the following window:
Select SSID: Select the SSID (main SSID or minor SSID) to configure security settings from the
drop-down menu.
WEP: Click "Enable/Disable" to enable or disable the WEP algorithm.
Radius Server: Enter the IP address of the Radius server.
Radius Server Port: Enter the authentication port of the Radius server. The default is 1812.
Shared Secret: Enter the shared key for the authentication server with 8~63 ASCII characters.
Session Timeout: The authentication interval period between AP and authentication server. The default
is 3600s.
6.4 WPS Settings
WPS (Wi-Fi Protected Setting) can be used to easily and quickly establish the connection between the
wireless network clients and the device through encrypted contents. The users only enter a PIN code or press
6