vita MultiPump Mode D'emploi page 24

VITA MultiPump
Pos Action
20 Connecting additional VITA dental furnaces and VITA vPads
Please note:
• Furnace positioning on the VITA vPad excellence must always begin with 1
• Always connect the VITA dental furnaces and VITA vPad to the
VITA MultiPump beginning with step 1
• The USB cable of the VITA vPad is always inserted at the location on the
VITA MultiPump where the vacuum tube of the corresponding VITA dental
furnace is located.
Example: If the first VITA vPad uses vacuum connections 1+2 for two
VITA dental furnaces, then the VITA dental furnaces of the second VITA vPad
must be connected to vacuum connections 3+4 and the USB cable of the second
VITA vPad connected to USB port 3 of the VITA MultiPump.
Three connection examples are shown below.
Vacuum connection 1 Vacuum connection 2 Vacuum connection 3 Vacuum connection 4
USB port 1
vPad excellence
Furnace 1
One VITA vPad excellence with four VITA dental furnaces
Vacuum connection 1 Vacuum connection 2 Vacuum connection 3 Vacuum connection 4
USB port 1
vPad excellence
Furnace 1
Two VITA vPad excellence devices, each with two VITA dental furnaces
Vacuum connection 1 Vacuum connection 2 Vacuum connection 3 Vacuum connection 4
USB port 1
vPad excellence
Furnace 1
Four VITA vPad excellence devices, each with one VITA dental furnace
24
MultiPump
USB port 2 USB port 3
Switchbox
Furnace 2 Furnace 3
MultiPump
USB port 2 USB port 3
vPad excellence
Switchbox Switchbox
Furnace 2 Furnace 3
MultiPump
USB port 2 USB port 3
vPad excellence vPad excellence
Furnace 2 Furnace 3
USB port 4
Furnace 4
USB port 4
Furnace 4
USB port 4
vPad excellence
Furnace 4
E