Ace INNOMARK Série Notice D'utilisation page 4

INNOMARK gamma
BREATHALYZER
Important Notes – EN
IMPORTANT NOTES ON THE CALIBRATION
Each breathalyzer which you buy from ACE Instruments can also be calibrated
by ACE Instruments. Of course, we also calibrate devices which were bought
from other contractors, as long as these devices are identical in construction to
the devices sold by ACE Instruments.
You can see the due date of the next calibration on the calibration sticker
placed on your breathalyzer. If the sticker is missing, the calibration is to be
done 6 months after the purchase date: e.g. purchase date: 13.05. = next
calibration on the 13. 1 1. and the next on the 13.05. of the following year.
For a calibration service you can send the device to the service address
specified at www.alkomat.net.
WHY IS A CALIBRATION NECESSARY?
The calibration is not mandatory, but the accuracy of the sensor installed in
the breathalyzer will decrease steadily without a calibration and additionally
guarantee expires, if you don`t pay attention to the calibration ranges.
WHICH FACTORS INFLUENCE THE MEASUREMENT
ACCURACY
• The more often the device is used the more the zero point is influenced.
• The higher the alcohol concentration is, the more the zero point is relocated.
• Devices which are used rarely have a decreased sensibility, too.
ACE Instruments recommends using the breathalyzer at least once (1x) a week
independently of having drunken alcohol or not. To maintain the measurement
accuracy, the breathalyzer should also be calibrated periodically.
06
PLEASE ALSO BE AWARE OF THE SEVERAL FACTORS OF
INFLUENCE ON THE MEASURING RESULT
• Alcohol amount
• Period of the consumption of alcohol
• Gender
• Age
• Weight
• Height
• Drinking habits
• Health state
• Vitality of the liver
• Size of the lung
• Admission of food during the consumption of alcohol
• Influence of medicine
07