Cleaning, Care & Maintenance - Caterlite CK649 Mode D'emploi

UK
Operation
Lift the latch to open the lid.
1.
Fill the appliance with liquid. Do not fill above the FULL line.
2.
Close the lid, ensuring it locks firmly in place.
3.
Plug in the power cord and connect it to the mains power supply.
4.
The BOIL indicator lights up and the appliance begins to heat.
5.
Press the select button to select required temperature
6.
Once the correct temperature has been reached, the KEEP WARM indicator lights up and the appliance
7.
is ready to dispense.
WARNING: There is a danger of scalding when opening the lid during and after use. Take
care to avoid the expulsion of steam.
Dispense Liquid
There are 3 methods of dispensing liquid:
Hold a suitable receptacle beneath the spout.
1.
Unlock the Pump button and push down repeatedly to pump out the liquid (no power required)
2.
or
Push the Lock/Unlock button, then push the Dispense button to dispense the liquid
or
Push the Lock/Unlock button, then press the receptacle against the Cup switch behind the spout.
Reboil
It may be necessary to reheat the water in the appliance.
Press the REBOIL button to reboil the water.
Lock/Unlock the Pump Button
Slide the lock to the CLOSED position to lock the pump button.
Slide the lock to the OPEN position to unlock the pump button.
Cleaning, Care & Maintenance
• Use a damp cloth to clean the body and lid.
• Dry thoroughly after cleaning.
Descaling
Periodically descale the appliance with a suitable descaling solution.
Add suitable descaling product and water to fill line (following product instructions)
1.
Press clean button. Clean function will take 70 minutes
2.
Note: Always run water through the appliance after descaling to rinse the inner pot and
tubes. Discard the water after use.
3