Closely follow the instructions set out in this
manual.
All responsibility, for any eventual inconvenien-
ces, damages or fires caused by not comply-
ing with the instructions in this manual, is de-
clined.
General precautions
The grinder must only be used by those who
understand how it works.
Do not store the grinder on or near sources of
heat, water or damp. Avoid moisture.
All repairs and maintenance must be carried
out by a qualified repair agent.
Installation
The machine must be connected to a power
outlet with the correct voltage.
Check and verify that the power outlet supply
voltage is the same shown on the rating-plate
of the appliance.
Please clean all individual components before
installation.
Attach the hopper to the grinder body as fol-
lows:
Bring the hole in front of the hopper in line with
the hole of the grind dial. (fig. 2)
Lock everything in place with the screw
Make sure the ON/OFF switch ("I" fig. 1) is in
the OFF position before plugging the grinder in.
Environmental
Regulations
Should you wish to discard the machine for any
reason, please comply with the following:
Take the machine to the local authorized com-
pany that collects discarded household appli-
ances. Correct processing enable valuable ma-
terials to be recycled in an intelligent manner.
Before discarding your machine it is important
that you cut off the power supply cord and re-
move it together with the plug. This machine
has been accorded the appropriate mark in ac-
cordance with European Directive 2002/96EG
regarding discarded electric and electronic
equipment. This directive determines the
standards for the collection and recycling of
discarded equipment that apply to the entire
territory of the European Union.
NL
FR
ES
EN
21