Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher 135105 Mode D'emploi

Masquer les pouces Voir aussi pour 135105:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Fill the shaker first with liquids, then solid ingredients.
Begin mixing at speed „I" (slow), before changing to speed „II" (fast).
The bar mixer is not intended for grinding ice. When making drinks, use crushed ice
when ice is necessary.

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power supply and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and
the plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets.
Therefore, you must not use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Clean the unit regularly.
o To wash the mixing tip, attach the shaker filled with warm water and washing-up
liquid (approx. 250 ml) to the unit, then turn on at speed „I" (slow) for 30 seconds.
Turn the switch to „O" (OFF) and pour out the water. Repeat the process with only
warm water to rinse the mixing tip. Use a soft, dry cloth to wipe the mixing tip.
o Rinse the shaker with warm water, then dry.
o The shaker and mixing shields are dishwasher-proof. To wash them in a dishwasher,
remove the shields from the mixing tip (turn them counterclockwise).
NOTE!
The mixing cup and mixing shields are dishwasher-safe!
o Wipe the unit's casing with a soft, moist cloth then dry thoroughly.
Use only soft cloths, never use sharp objects that may scratch the unit's surface.
o
o After washing, use a soft, dry cloth to dry and polish the unit.
- 23 -

Publicité

Table des Matières
loading

Table des Matières