Tenovis HSG-BASISMODUL DECT Notice D'utilisation page 27

UK
CHARGING AN OPTIONAL SPARE BATTERY
(Refer to the diagram on page 4)
You can purchase an optional spare battery for the HSG-Basismodul DECT. This can be charged in
the Spare Battery Charger Bay (26).
To recharge the spare battery, insert the battery pack into the base unit Spare Battery Charger Bay
(26). During charging the Spare Battery Charge Indicator ll (12) on the base unit will be illuminated.
When the remote pack is fully charged, the Spare Battery Charge Indicator ll (12) on the base unit
will extinguish. To remove the recharged battery, press the Battery Release Button (27).
Once fully charged, the spare battery can be used as a replacement when the current battery fitted
to the remote pack becomes depleted.
Note: A completely depleted battery will require approximately 3 hours of charge time to
fully recharge. However if you are charging a spare battery and you place the remote
pack into the base unit to recharge, the charger will switch to charge the remote pack.
When the remote pack is fully charged, the charger will switch back to charging the spare
battery. This priority to the remote pack ensures that you always have maximum talk time.
WARNING: If the battery or base unit is colder than 5ºC or hotter than 40ºC the charger
will turn off and not charge the battery. This is to prevent damage to the battery.
USING THE HEADSET DURING BATTERY CHARGING
You can continue to use the headset whilst charging either the remote pack or spare battery.
25