RIDGID R840094 Manuel D'utilisation page 5

Chargeur de piles à composition chimique double
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OPERATION
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may
become hot. A hot battery pack may be placed directly onto
the charger port but charging will not begin until the battery
temperature cools to within acceptable temperature range.
When a hot battery pack is placed on the charger, the orange
and green LEDs will be on. When the battery pack cools, the
charger will automatically begin charging.
LED FUNCTIONS
See Figure 3, page 7.
Mode
WAITING TO CHARGE
CHARGING
FULLY CHARGED
TEMP. DELAY
STANDBY FULL
STANDBY POWER
(Battery pack
not inserted)
DEFECTIVE
CALIFORNIA PROPOSITION 65
WARNING:
This product may contain chemicals, including lead, known to the State of California to cause cancer, birth defects
or other reproductive harm. Wash hands after handling.
NOTE: Maintenance information begins on page 6 after French
and Spanish language sections. Illustrations start on page 7.
This product has a 90-Day Satisfaction Guarantee Policy, as well
as a Three-year Limited Warranty. For Warranty and Policy details,
please go to www.RIDGID.com or call (toll free) 1-866-539-1710.
Power
Charge
Green LED
Green LED
On
On
Flashing
On
On
On
• Hot battery pack: When battery pack reaches cooled temperature, charger begins charge mode.
• Cold battery pack: When battery pack warms, charger begins charge mode.
• Deeply discharged battery pack: Charger conditions battery until normal voltage is reached,
then begins charge mode.
Fade
Fade
Fade
On
• If defective, try to repeat the conditions a second time by removing and reinstalling the battery
pack. If the LED status repeats a second time, try charging a different battery.
• If a different battery charges normally, dispose of the defective pack (see battery pack operator's
manual).
• If a different battery also indicates "Defective," the charger may be defective.
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger
port but charging will not begin until the battery temperature
warms to within acceptable temperature range. When a cold
battery pack is placed on the charger, the orange and green
LEDs will be on. When the battery pack warms, the charger
will automatically begin charging.
To Be
Charged
Orange LED
On
5
Temp. Delay
Defective
Orange LED
Red LED
On
On

Publicité

Table des Matières
loading

Table des Matières