Televes COFDM-PAL Manuel D'utilisation page 50

User manual
To carry out a modification the
be pressed until the desired parameter flas-
hes. Then the parameter can be modified
just pressing the and keys .
c.- COFDM parameters menu
The parameters of the COFDM transmission
are displayed in this menu (FFT size, modu-
lation, guard interval and coderate).
d.- Menú de configuración
Through this menu the address if the unit
can be selected (1 a 254).
It is the installer's responsibility to ensure
that none of the addresses in the control
bus have been doubled.
From this menu you can switch between fre-
quency and channel table mode.
key must
The following channel tables are available:
Table 1: CCIR, New Zealand and Indonesia.
Italian channels.
Table 2: China, Taiwan and CCIR hyper-
band.
Table 3: M/N, Chile.
Table 4: France.
Table 5: Australia.
Table 6: Southafrica, K1 (8 MHz), I (Ireland,
8MHz).
Table 7: Former URSS and OIRT.
To carry out a modification the
be pressed until the desired parameter flas-
hes. Then the correspondent parameter can
be modified by pressing
e.- Language selection menu
The last extended menu allows the selection
of the menus language (English/Spanish).
By pressing
different languages.
key must
and
.
50
COFDM-PAL
or you switch between