Technical Data; Noise & Vibration; Dust Collection System - Pattfield PE-1200 TS Traduction De La Notice Originale

Technical Data

Nominal voltage
Rated power
No-load speed (n
Blade
Max. cutting depth (Wood)
Bevel degree
Protection Class
Weight
Sound pressure level (L
Sound power level (L
Max. vibration emission (a
Only use saw blades that correspond with the specifications given above.
The values given are valid for nominal voltages U of 230 V. For lower voltage and models for
specific countries, these values may vary.
Please observe the article number on the type plate of the tool. The trade names of the individual
tool may vary.
Noise & Vibration
The values given in these instructions have
been measured in accordance with a stand-
ardized measurement procedure specified in
EN 60745 and can be used to compare tools.
It may be used for a preliminary assessment
of exposure.
Warning! The vibration emission
during actual use can differ from the
declared total value depending on the use
of the tool.
88 EN
)
0
)
pA
)
WA
)
hw
230 V / ~50 Hz
1200 W
5500/min
160 mm x 20 mm x 2.5 mm - 24/48 T
EN 847-1
90° = 55 mm / 45° = 42 mm
0 - 45°
/ II
4.8 kg
88.9 dB(A) / Uncertainty K = 3 dB(A)
99.9 dB(A) / Uncertainty K = 3 dB(A)
< 2.5 m/s
2

Dust collection system

Use of dust collection can reduce dust-related
hazards.
To prevent personal injuries, make sure to
connect a suitable vacuum cleaner to the dust
extraction port 14. The port is capable of a
connector of 35 mm.