Versatis_Conference_uk.qxd
32
4. FEATURES AVAILABLE DURING CALLS
4.1
ADJUST SPEAKER VOLUME
There are 16 different speaker volume levels.
Press
or
to adjust the speaker volume during a call.
l
4.2
MUTE FUNCTION
When the Mute function is activated, the microphone in the Pod is cut off.
Press
to mute or un-mute a call.
l
When the call is muted, the
4.3
R KEY
A "flash" signal can be sent during a call.
Press
to access additional services provided by your operator or PBX.
l
See chapter 5.3. "Programming the R (Flash) key" for information on how to adjust the flash time.
4.4
DISPLAY POD NUMBER
The telephone number of the Pod can be displayed for reference during a call. First, check that this function has been correctly
configured (see 5.4 "Programming the VERSATIS Conference telephone number").
During a call, press
l
The telephone number is displayed (if programmed).
"
The display reverts to its previous state after 10 seconds.
"
or
Press
to clear the number from the display and return to the call timer.
l
31/03/2005
16:03
Page 32
icon lights up, and the Pod LEDs switch to red and flash slowly.
.