König Electronic CMP-WNUSB40 Mode D'emploi page 4

Connect to Wireless Access Point
Using Configuration Utility to Connect to Wireless Access Point (Or use Windows Zero configuration):
1. After installation is complete, wireless configuration
utility will be shown in the desktop of your computer
automatically. You will also see an icon at the lower-
right corner of your windows system. Click the
icon with your right mouse button, and select the
configuration utility.
2. Configuration utility will scan for wireless access points
and connect to any unencrypted wireless access point
automatically. If you wish to connect to another access
point, select the access point and double click it.
If the wireless access point you want to connect does not
show here, please click 'Rescan'.
3. If the wireless access point uses encryption, you have
to input WEP key or WPA preshared key. Please ask
the owner of the wireless access point you want to
connect and input the correct key here, and then click
'OK'. If the value you inputted here is wrong, you will
not be able to connect to the wireless access point.
4. If the wireless access point is successfully connected,
you'll see a symbol appears in front of the name of
wireless device.
4