How To Find The Screenline Id; How To Find The Avantek Remote Id - RFXCOM RFXtrx433 Manuel Utilisateur

7.15. How to find the Screenline ID

You can assign a random ID to the Screenline. If you want to use the same ID as the remote you
can find the ID of the remote using RFXmngr.
Start RFXmngr and enable only the Lighting4 protocol and undec on.
Press a button on the remote and you will receive a message like:
------------------------------------------------
Packettype = UNDECODED RF Message
UNDECODED ARC:40000F7BD1D2AF04B7
The ID starts at the 7

7.16. How to find the Avantek remote ID

You can find the ID of the remote using RFXmngr.
Start RFXmngr and enable only the Lighting4 protocol.
Press a button on the remote and you will receive a message like:
Packettype = Lighting4
subtype = PT2262
Sequence nbr = 3
Code = 122336 decimal:1188662
S1- S24 = 0001 0010 0010 0011 0011 0110
Pulse = 280 usec
Signal level = 7
The ID to be used is 1 22 33
Copyright 2011-2017, RFXCOM
th
character, in this example the ID = 7B D1
-64dBm
RFXtrx FR Version 5.33 page 36 / 49