Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7.11. SEAV TXS4
The ID can be found using RFXmngr and enable only ByronSX and undec on.
Or calculate the ID:
A SW1 switch on = 1
|---------SW1------------|
1 2 3
4 5 6 7
0 x x x | x x x x | x x x 0 | 0 1 0 1
For example SW1 = on off on off on off on off on off
The ID will become:
|---------SW1-----------|
1 2 3
4 5 6 7
0 1 0 1 | 0 1 0 1 | 0 1 0 0 | 0 1 0 1
7.12. Comment obtenir l'ID du bandeau de led RGB dx.com
Flasher le RFXtrx433 avec le firmware Type2 pour permettre la réception de l'ID grâce au logiciel
RFXmngr.
Dans le logiciel RFXmngr, activer uniquement le protocol LightwaveRF (AD).
------------------------------------------------
Packettype
= Lighting5
subtype
= RGB TRC02
Sequence nbr
= 5
ID
= FCC48B
Command
= On
Signal level
= 8
The ID is: FC C4 8B
Si le firmware Type2 ne supporte pas votre périphérique, essayez en utilisant le firmware
Type1/ext (Voir chapitre 2.2)
7.13. How to find the dx.com RGB LED strip driver ID (rev. 2)
Valid for the old TRC02 remote with 3 batteries and ebay.com 191481664563.
In RFXmngr enable only the Lighting4 protocol.
------------------------------------------------
Packettype
= Lighting4
subtype
= PT2262
Sequence nbr
= 29
Code
= 161C84
The ID is: 16 1C
7.14. How to find the Eurodomest ID
You can assign a random ID to the Eurodomest. If you want to use the same ID as the remote you
can find the ID of the remote using RFXmngr.
Start RFXmngr and enable only the Lighting4 protocol.
Press a button on the remote and you will receive a message like:
------------------------------------------------
Packettype
= Lighting4
subtype
= PT2262
Sequence nbr
= 12
Code
= 6DFE0F
The ID is: 6 DF E0
Note: Eurodomest can also be controlled using ARC.
Copyright 2011-2017, RFXCOM
8 9 10
8 9 10
RFXtrx FR Version 5.33
this is hex: 5 5 4 5
page 35 / 49
Publicité
Table des Matières
