Dell PowerEdge 17FP Guide Utilisateur page 19

Function Icon
OSD V. Position
Graph / Text
Recall
Language
Auto Adjustment
Exit
Sharpness
1280 x 1024
60.2 HZ
VER 0.02MTGK0
Intellectual-Auto
VESA DPMS
Functionality
Description
This function moves OSD menu vertically.
Because the H and V-Frequencies of both 640 x 400@70
Hz and 720 x 400@70 Hz are the same, this function
allows you to manually select either 640 x 400 (graphics
mode) or 720 x 400 (text mode).
The recall function will reset all adjusted parameters to
factory preset values.
Five OSD languages are available: English, German,
French, Spanish, and Japanese. Press (
adjustment button to select the desired language.
Press ( ) button to activate the Auto Adjustment
function.
The Auto Adjustment function allows you to adjust the
display size, clock, and phase to obtain a optimize viewing
setting. This process will take 3 ~ 5 seconds to activate.
NOTE: After Auto Adjustment, the display might display
the wrong position or size if it has received a pattern
which has no screen border.
Saves the values of this setting and exits the OSD menu
function.
Adjust the scale-up effect (smoother or sharper).
Current mode resolution.
Current mode vertical frequency ±1 Hz.
Firmware version.
The Auto Adjustment function starts automatically when a
display mode is input for the first time. After adjustment,
this mode is saved. The monitor switches to the optimized
condition automatically whenever this mode is
encountered again. A total of 21 recently used modes are
recorded into this system.
When signaled by the host system, the monitor displays a
black screen for about 3 seconds. After 3 seconds, if the
monitor receives no further signal, it will display "No
Signal" and then enter the power saving mode.
) or ( )
1-13
Us er 's Guide