Wiring Connection - Kenwood DPX-7100DAB Mode D'emploi

INSTALLATION/CONNECTION

Wiring connection

When connecting to an external amplifier, connect its ground wire to the car's chassis to
avoid damaging the unit.
If your car does not have an ISO terminal:
We recommend installing the unit with a commercially available custom wiring harness
specific for your car and leave this job to professionals for your safety. Consult your car audio
dealer.
Connecting the ISO connectors on some VW/Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
36
ENGLISH
ISO connectors
Ignition wire (Red)
Unit
Battery wire (Yellow)
*
Pin Color and function (for ISO connectors)
: Battery
A4 Yellow
Blue/White *
1 : Power control
A5
: Ignition (ACC)
A7 Red
A8 Black : Earth (ground) connection
Purple ]
B1
: Rear speaker (right)
For 3-way crossover: Tweeter (right)
Purple/black [
B2
Gray ]
B3
: Front speaker (right)
For 3-way crossover: Mid range speaker (right)
B4 Gray/black [
B5 White ]
: Front speaker (left)
White/black [ For 3-way crossover: Mid range speaker (left)
B6
Green ]
B7
: Rear speaker (left)
For 3-way crossover: Tweeter (left)
Green/black [
B8
1
( 37)