Safety; General Information; Risks To Child Safety; Danger From Falling Objects - Sigel Sound Balance SB500 Instructions De Montage Et Mode D'emploi

2

Safety

2.1

General information

Before assembling and using the acoustic wall, please note the following:
The acoustic wall is designed for indoor use only.
ƒ
The acoustic wall should only be used as described in this user guide.
ƒ
Supervise children and people with limited physical, sensory or mental abilities, or with limited
ƒ
experience­and/or­knowledge­of­this­type­of­product­when­using­the­acoustic­wall.
Keep the acoustic wall away from fire and other ignition sources.
ƒ
2.2

Risks to child safety

Keep packaging away from children.
ƒ
Plastic bags and small items are a choking hazard.
2.3

Danger from falling objects

Do not hang clothing or other items on the assembled acoustic wall, or lean on it with your full
ƒ
weight.
It could tip over and injure somebody, or cause damage to the product itself.
Check that the acoustic wall has been assembled correctly before using it.
ƒ
2.4

Where to place the product

The acoustic wall should only be placed on level floors.
ƒ
After positioning the wall, ensure that it is level and stable.
Do not expose the acoustic wall to extreme conditions.
ƒ
Do not expose the surface of the acoustic wall to direct sunlight or radiator heat to avoid long-
ƒ
term discolouration of the fabric surface.
There are 2 anti-slip pads on the bottom of the two feet, to prevent scratching and damaging
ƒ
the floor surface.
The assembly set includes 2 additional anti-slip pads. After assembling the product, affix them
to the feet in the position indicated.
Sound Balance acoustic wall 13