SMIXIN COMPACT Guide D'installation page 16

2. Connect the water tube from the Compact to the flow
regulator on the WaterIn module. Do not hesitate to force
the tube down to the stop of the flow regulator.
3. Connect the water inlet flexible connector onto the WaterIn
module using wrenches.
4. Fix the WaterIn module onto an appropriate surface.
6.3 Installation of the Black Box
(illustration E + H)
1. Remove the plastic protection of the double-sided tape on
the back of the Black Box.
2. Hold the Black Box on the surface and press 30 seconds.
NB: if it is not possible to fix the Black Box with tape, the
system can be fixed with 2 screws (position in red circles),
which are not provided.
3. Connect the power supply.
7 Insertion of the soap pouch
(illustration F)
CAUTION
• Before proceeding to the installation,
check the condition of the soap pouch
and the Smart Mixing Unit.
• Carefully read the instructions on the
soap pouch.
• Do not interfere with the lift movement
of the Compact until it stops.
SMIXIN SA | Rue Centrale 115 | CH-2503 Bienne
T : +41 32 366 64 00 | info@smixin.com
V2 09/2017
Page | 16