ISOUND HiFi Waves Guide De L'utilisateur page 6

Connecting via Bluetooth® ( rst time set-up)
1. Power on the speaker by moving the power switch om
"OFF" to "ON". You will hear the speaker say "Bluetooth mode".
2. Open the se ings on your Bluetooth device. (Bluetooth must
be enabled).
3. Select HiFi Waves om the devices list.
4. Once paired, you will hear "Bluetooth paired".
5. To allow another user to connect to the speaker, disconnect
om the HiFi Waves and repeat step 2-4.
NOTES:
• Your device will automatically nd and pair with the HiFi
Waves a er the initial pairing. If your device does not automati-
cally pair, turn o the speaker and repeat steps 1-4.
• The speaker will return to Bluetooth mode a er the speaker
has been turned o .
Connecting a device via audio cable (LINE IN)
1. Power on the speaker by moving the power switch om
"OFF" to "ON", you will hear the speaker say "Bluetooth
mode".
2. Plug one end of the included audio cable into the AUX port
on the back of the speaker. You will hear the speaker say "LINE
IN mode".
3. Plug the other end of the cable into your audio device.
NOTES:
• Make sure that you are using the audio cable that was
included with your speaker.
• "LINE IN mode" only functions if you have an audio
cable inserted.
• If you plug in an audio cable into the AUX port, the mode will
automatically switch to "LINE IN mode".