Display Contrast; Current Delay Time And Average Power - IME Nemo 96 HDLe Mode D'emploi

Nemo 96 HDLe
(see table)
1.2 Connection
↵
selects connection
confirms
select the desired connection and scrupulously respect the linked wiring diagram.
The selectable wiring diagrams are:
Symbol Line
1N1E Sigle-phase
3-1E 3-phase 3 wires Balanced
3N1E 3-phase 4 wires Balanced
3-2E 3-phase 3 wires Unbalanced
3-3E 3-phase 3 wires Unbalanced
3N3E 3-phase 4 wires Unbalanced
1.3

Current delay time and average power

Selectable delay time: 5, 8, 10, 15, 20, 30, 60minutes
The selected time is valid both for the current and the average power
↵
selects the contrast level
confirms
8
Load n° external CT'S Wiring
- 1 S 1000/394
1 S 1000/395
1 S 1000/396
2 S 1000/397
S 1000/398
3
CT connection with
S 1000/400
common point,1 return
S 1000/399
3
CT connection with
S 1000/401
common point,1 return
1.4

Display contrast

4 value display to adjust display contrast
↵
selects the contrast level
confirms
1.5 Display contrast
The 4 selectable levels
Connection
↵
Aron L1 - L3
selects the lighting level
confirms
1.6 Rated frequency
Rated value fn 50Hz - 400Hz (automatic selection)
The meter automatically recognizes the frequency, without any programming
1.7 Rated current
Rated value 1A
↵
selects 1A or 5A
confirms
(0 – 30 – 70 – 100%) show the display lighting percentage
(external CT secondary winding)
or 5A
(external CT with secondary /1A) (external CT with secondary /5A)
02/18 E08 10782668 WEB E cod.MF964..