Modulo IF96007A comunicazione PROFIBUS
Il modulo IF96007A abbinato a strumenti della serie
Module IF96007A combined ith meters of Nemo
Nemo 96HD/HD+/HDLe ne rende disponibili tramite
96HD/HD+/HDLe series makes available, by PROFIBUS
comunicazione PROFIBUS tutti i dati riguardanti le misure
communication, all the data
effettuate ed i parametri di configurazione
relevant to carried out measurement as well as the confi-
guration parameters.
COMUNICAZIONE PROFIBUS
PROFIBUS COMMUNICATION
Isolata galvanicamente da ingressi misura e alimentazione
Galvanically insulated from measuring inputs and aux.
(Nemo 96HD)
supply (Nemo 96HD)
Standard: PROFIBUS EN50170
Standard: PROFIBUS EN 50170
Tempo di risposta a interrogazione: ≤ 10ms
Required response time to requerest: ≤ 10ms
Distanza massima dal supervisore: secondo standard
Highest distance from supervisor: standard
Velocità trasmissione: fino a 12Mb
Baud rate: up to 12Mb
PARAMETRI PROGRAMMABILI
N° address: 1...127
N° indirizzo: 1...127
ATTENZIONE!
Modules must be connected with non-fed meter.
L'inserimento dei moduli deve essere effettuato con lo stru-
mento non alimentato.
Module IF96007A PROFIBUS communication
Module IF96007A communication PROFIBUS
Le module IF96007A connecté à des appareils de la série
Nemo 96HD/HD+/HDLe rend disponible, par la communica-
tion PROFIBUS tous les données concernant les mesurages
effectués et les paramètres de configuration.
COMMUNICATION PROFIBUS
Isolée galvaniquement des entrées mesure et de l'alimentation
(Nemo 96HD)
Standard: PROFIBUS EN 50170
Temps de réponse à l'interrogation: ≤ 10ms
Max. distance du superviseur: selon standard
Vitesse de transmission: jusqu'à 12Mb
PROGRAMMABLE PARAMETERS
N° adresse: 1...127
ATTENTION!
Lors du montage des modules, le Nemo 96HD/HD+ doit
impérativement être hors tension.
S 1000/289
PROFIBUS
5
4
3 = + RXD / TXD
8 = - RXD / TXD
6 = VP
5 = DGND
9
8
BU S
PR O FI
Modul IF96007A PROFIBUS-Kommunikation
Wird das Modul IF96007A mit Geräten der Reihe Nemo
96HD/HD+/HDLe verbunden, so wird in der PROFIBUS-
Übertragung die Messungen der Daten und die
Konfigurationsparameter zur Verfügung gestellt.
PROFIBUS KOMMUNIKATION
Galvanisch isoliert von Messeingängen und Versorgung
(Nemo 96HD)
Standard : PROFIBUS EN50710
Antwortzeit zur Abfrage: ≤ 10ms
Max. Entfernung vom Überwacher: nach Standard
Übertragungsgeschwindigkeit: bis 12Mb
PARAMETRES PROGRAMMABLES
Adresse: 1...127
ATTENTION!
Das Modul darf nur bei ausgeschaltetem Gerät
(ohne Versorgungsspannung) eingesteckt bzw. entfernt
werden.
3
2
1
7
6
PROFIBUS
PROGRAMMIERBARE PARAMETER
ACHTUNG!
MD
107 1763
ISTRUMENTI MISURE ELETTRICHE SpA
Cod. IF96007A
ISTRUMENTI MISURE ELETTRICHE SpA
ISTRUMENTI MISURE ELETTRICHE SpA
Via Travaglia 7
20094 CORSICO (MI) ITALIA
Tel. +39 02 44 878.1
www.imeitaly.com
info@imeitaly.com
01/ 16