Troubleshooting; Maintenance; Service; Accessories - Delta AP400 Manuel D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

When using this dust collector, do not pick up anything that is burning, smoldering or smoking,

such as matches, cigarettes, or hot ashes.

Do not use to vacuum combustible explosive materials, such as coal, grain or other finely

divided combustible material.

Do not use to vacuum hazardous, toxic, or carcinogenic materials such as asbestos, pesticide

or lead-based paint debris.

For assistance with your machine, visit our website at www.deltamachinery.com for a list of service centers or call the

DELTA Machinery help line at 1-800-223-7278 (In Canada call 1-800-463-3582).

KEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp

cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear certified safety equipment for eye, hearing and respiratory protection while using compressed air.

FAILURE TO START

Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the

outlet. Also, check for blown fuses or open circuit breakers in the line.

REPLACEMENT PARTS

Use only identical replacement parts. For a parts list or to

order parts, visit our website at servicenet.deltamachinery.

com. You can also order parts from your nearest factory-

owned branch, or by calling our Customer Care Center at

1-800-223-7278 to receive personalized support from highly-

trained technicians.

SERVICE AND REPAIRS

All quality tools will eventually require servicing and/or

replacement of parts. For information about Delta Machinery,

its factory-owned branches, or an Authorized Warranty

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and

Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of

your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use

of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be

used with this product.

To register your tool for warranty service visit our website at www.deltamachinery.com.

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal

use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service

center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity

to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric

motors be returned prepaid to a motor manufacturer's authorized station for inspection and repair or replacement. Delta will not be responsible

for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone

other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential

damages resulting from defective products. This warranty is Delta's sole warranty and sets forth the customer's exclusive remedy, with respect

to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly

disclaimed by Delta.