Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
í
Setting the Date and
Time
Operating Procedure
1.
Check that the camera is set to the
Playback mode by holding down the
monitor button for a moment.
2.
Press the
OK/menu button.
¼ The Playback mode menu 1/3 is displayed on
the monitor.
3.
Press the
or
display the menu 3/3, and select
4.
Display the date/time setting menu by
pressing the
5.
Select one of the following date/time display
formats by pressing the
key.
Y—M—D (Year·Month·Day)
M—D—Y (Month·Day·Year)
D—M—Y (Day·Month·Year)
Then press the
¼ The cursor moves to the figure setting field.
6.
Set the first figure by pressing the
arrow pad key, and then press the
pad key.
¼ The cursor moves to the next figure.
7.
Repeat the above steps to set the hour and
minutes.
8.
When the actual time reaches zero seconds,
press the
OK/menu button.
¼ The date and time are set and the screen
returns to the Playback mode menu 3/3.
arrow pad key to
or
arrow pad key.
or
arrow pad
arrow pad key.
1 /3
SELECT
Playback mode menu 1/3 screen
.
or
arrow
Arrow pad
NO
OFF
NO
NO
SET
OK
OK/menu button
3 / 3
SELECT
END
Playback mode menu 3/3 screen
Y
M
D
SELECT
SELECT
END
SET
Date/time setup screen
1
. 1. 1
SELECT
SET
Date/time setup screen
9
OK
OK
OK
OK
Publicité
Chapitres
Table des Matières
