Perel WT0220 Mode D'emploi page 4

5. Using the LED Clock
5.1 Time Setting
Hold the SET button pressed. Set the hour and minutes with
UP and DOWN, and press SET to confirm.
In time mode, hold the UP button to switch between 12 h
and 24 h time mode. In 12 h mode, the PM icon denotes the
afternoon.
5.2 Alarm Setting
Select the alarm mode with the SET button. The AL icon will
flash. Hold the SET button pressed. Set the alarm hour,
minutes and snooze length with UP and DOWN, and press
SET to confirm.
Hold the DOWN button pressed to activate/de-activate the
alarm.
When the alarm beeps, press SET to snooze, or UP/DOWN
to switch off the alarm.
5.3 Brightness Setting
In time mode, select your brightness level with the UP
button. Default brightness level is medium.
5.4 Night Mode
The clock will dim automatically during night. Default night
time is from 18:00 to 6:00.
Select the night mode with the SET button. Switch the night
mode on/off with UP or DOWN.
V. 03 – 20/09/2018
WT0220
4 ©Velleman nv