Setting The Time; Setting The Date; Setting The Alarm - Perel WC229 Mode D'emploi

5. Settings
At normal display, briefly press SET to display the different
modes. Selecting sequence:

Setting the Time

1.
2.
3.
4.

Setting the Date

1.
2.
3.
4.

Setting the Alarm

1.
2.
3.
Selecting the Display Mode
At normal display, briefly press UP until display mode 1 (dp-1), 2
(dp-2) or 3 (dp-3) is displayed. Simply release to select the
display mode.
dp-1: alternate time/date display
dp-2: fixed time display
dp-3: fixed time display + mode display for 15 seconds
V. 01 – 14/11/2019
WC229/WC233
time → date → alarm 1 → alarm 2 → alarm 3 → time
Press and hold SET. The digits will flash. Set the 12h or
24h time format with UP or DOWN.
Press SET again. The digits will flash. Set the hour with UP
or DOWN.
Press SET again. The digits will flash. Set the minutes with
UP or DOWN.
Press SET again to confirm and to return to normal mode.
Briefly press SET to display the date. Press and hold SET.
The digits will flash. Set the year with UP or DOWN.
Press SET again. The digits will flash. Set the month with
UP or DOWN.
Press SET again. The digits will flash. Set the date with UP
or DOWN.
Press SET again to confirm and to return to normal mode.
Briefly press SET until alarm 1 (A1), 2 (A2) or 3 (A3) is
displayed. Press and hold SET. The digits will flash. Set the
hour with UP or DOWN.
Press SET again. The digits will flash. Set the minutes with
UP or DOWN.
Press SET again to confirm and to return to normal mode.
Follow the steps above to set the desired alarms.
4 ©Velleman nv