HOW TO ENJOY THE HEATING FUNCTION?
Fig.01
If you want to use heating function, please disassemble the cool and hot air
outlet connectors in an upward direction as "Fig.01", and interchange two
connectors as "Fig.02" to re-install again. After installation, the unit should be
like "Fig.03".
TROUBLE SHOOTING
Problem
Cause
E1
Electrical short on both
temperature sensor and PCB
E2
Electrical short of temperature
sensor copper tube and PCB
wiring
E4
Indicates water tank full or poor
contact of signal plug.
www.blaupunkt.com
Fig.02
Contact an electrician for repair
Contact an electrician for repair
User needs to pull out the rubber stopper
which is located at the bottom of the unit,
to drain the water away. Check that the
plug has been wired correctly.
Arrifana 0707
Fig.03
Trouble shooting
50