Publicité
Les langues disponibles
Les langues disponibles
THANK YOU!
Thank you for choosing this EUROM leaf blower: you have made an excellent choice!
To ensure that you enjoy your leaf blower without problem and for an extended period of
time it is important that you and any other users are aware of how it works. Before use,
please read the instruction manual and labels on the device: they will teach you how the
leaf blower should be used (the options for use and limitations), as well as its potential
dangers. If you do not understand something, please consult your dealer.
The manual forms part of the device and should be kept with it for consultation by future
users.
We wish you many hours of problem-free user pleasure!
GENERAL SAFETY RULES
1. Before using your leaf blower, check for visible damage (including the cable and plug).
Never use a damaged device and return it to your supplier for replacement.
2. This device is intended for use by private individuals only. It should not be used for
commercial purposes.
3. The electrical voltage and frequency, as indicated on the device, must agree with the
power socket to be used. The electrical installation must be secured with an earth
leakage switch (max. 30 mAmp).
4. Only use an undamaged, approved and waterproof extension cord with a minimum
diameter of 2 x 1.5 mm² (up to 15 metres) or 2 x 2.5 mm² (from 15 to 40 metres) and an
approved minimum capacity of 3000 Watts. Avoid using an extension cord longer than
40 metres. Always unfurl the cord completely to prevent overheating! Always lead the
electrical cable to the rear, away from the device. Make sure that there are no kinks or
unusual twists in the cable and that it is not stepped on and no objects are placed on it.
Keep the electrical cable away from heat, oil, solvents and so forth. Never lead the
cable around sharp corners; do not coil to tightly after use and make sure that it is not
trapped.
5. If the electrical cable or extension cord is damaged, immediately remove the plug from
the power socket. Do not touch the cable before you have removed the plug from the
power socket! A damaged electrical cable or plug must be replaced by an approved
electrician. You should never replace these yourself!
6. Always check the device for damage or wear and tear before using. Also check whether
the electrical cable and extension cord has the correct insulation, any cuts or worn
areas and the condition of the connectors. Do not use the device if you notice any
damage/wear and tear/deficiencies to the device, electrical cable or plug, or when it
works poorly, has fallen or shows any other signs of malfunction. Return the entire
device to your supplier or an approved electrician to be checked and repaired. Always
ask for original parts.
21
EN
Publicité
