Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Assembly

Follow these assembly instructions step by step to prevent any errors during set-up and
subsequent use:
1. Set up the base (3) in this way and
align the plastic feet correctly as re-
quired.
3. Secure it in place using 3 hexagon
socket bolts and the nuts (E).
5. Secure it in place using 3 hexagon
socket bolts and the nuts.
13
2. Slide the short tube (2) into the L-piece
at the bottom (D) of the base.
4. Slide the long tube (5) into the L-piece
at the top (C) of the base.
6. Slide the rear wheel holder (1) into the
short tube and secure it in place using
a locking screw (B).
EN

Publicité

Table des Matières
loading

Table des Matières