Using The Stove - Dometic ORIGO E100 Notice D'utilisation

Using the stove

Observe the following safety instructions for the electrical connections:
NOTICE! Risk of short circuit!
A
 Always use sockets which are grounded and secured by
residual current circuit breakers.
 If you have to feed cables through metal walls or other walls with
sharp edges, use ducts or tubes to prevent damage.
 Do not lay cables which are loose or bent next to electrically
conductive material (metal).
 Fasten the cables securely.
 Do not pull on the cables.
 Lay the cables so that they cannot be tripped over or damaged.
➤ Check the type plate of the stove to ensure that the voltage of the unit
matches the voltage of the source.
➤ Install to a circuit breaker with at least 3 mm (
ing to "Technical description" on page 9.
➤ Connect the three conductors of the connection cable via circuit breaker
to the AC mains:
– Black: L1, ungrounded conductor
– White: L2, neutral
– Green: ground
➤ Secure the cable with a clamp.
7 Using the stove
NOTICE!
A
 The heating element used in this appliance ensures a rapid
heat-up. Ensure that the cooking surface is free of any combus-
tible materials before operation.
 The heating area will remain hot after the burner is switched off.
Watch the LED "Surface Hot" and take care not to place any-
thing on the stovetop, which may be damaged or become hot to
the touch until cool-down is complete.
12
Dometic ORIGO
1
in) disconnection accord-
/
8
EN