Fracarro FIL 10 Instructions D'emploi page 39

Setting the gain of the B.III+DAB inputs
To determine the gain in the B.III+DAB input, lift/lower the corresponding green bar.
Gain adjustment for the
Regolazione del Guadagno
cell B.III+DAB
per la cella B.III+DAB
Valore del Guadagno (in dB) Gain value (in dB) for the
per la Cella B.III+DAB
cell B.III+DAB
Indicazione della Cella: Indication of the cell:
B.III
B.III
Settings of UHF inputs
To define the settings of remote power supply of the input, double-click one of the 3 UHF inputs (UHF1,
UHF2 or UHF3) and the following window will appear:
Select the 12V or 24V voltage and enable it in the inputs you want.
Furthermore, from this window, you can manage the gain of the input dynamics of UHF1, UHF2 and UHF3.
Save/Open file
To save the configuration file, enter the "File – Save as" menu, enter the name of the file you want and decide
the path where you want to save the file.
To upload a configuration that you have saved on your computer, enter the "File - Load" menu and search
for the configuration file you have previously saved.
To load the configuration into the FIL by means of the FRPRO software, save the configuration file (".cpr
extension") onto a USB pen drive and follow the instructions in paragraph "5.2.3 USB MEMORY MENU."
39