Light Function; Temperature Function - Bresser MyTime Pro Mode D'emploi

2. Press MODE again: the minute digits are blinking and can
be set by pressing + or - key.
3. Press MODE again: the alarm time is set and icon
turn on.
ENABLE ALARM 1 AND/OR ALARM 2
1. Press alarm will enable Alarm 1 with
2. Press alarm again will enable Alarm 2 with
3. Press alarm again will enable both Alarm 1 and Alarm 2
with and icons to turn on.
4. Press alarm again will disable both Alarm 1 and Alarm 2
with and icons to turn off.
STOP/DISTURB ALARM
When the Alarm 1/Alarm 2 is ringing, the relatives alarm icon
/ be flashing.
1. Press alarm key to turn the alarm off.
2. Touch SNOOZE/LIGHT alarm stops and the backlight
will turn on for 5 seconds with deleted, the repeat alarm
indicator flashing. The alarm sounds again after 4
minutes.
18
3. If the alarm is not turned off, it will stop automatically after
4 minutes.
will

LIGHT FUNCTION

Touch SNOOZE/ LIGHT Amber backlight will be activated
and turned off automatically after 5 seconds.
icon turn on.
PROJECTION LIGHT AND ITS ADJUSTMENT
icon turn on.
1. Touch SNOOZE/ LIGHT projection light will be activated
and turned off automatically after 5 seconds.
2. When insert adaptor and move CONTINUE PROJECTION
switch to the direction of the arrow, projection light will
turn on continuously until the switch is moved to opposite
direction or the AC/DC adaptor is pulled off.
3. Press FLIP key to rotate the projection image to 180
orientation clock wise.
4. Turn the focus wheel to adjust the image manually.

TEMPERATURE FUNCTION

Press WAVE/°C/°F to select the temperature display
between Celsius or Fahrenheit.