Bresser MyTime Pro Mode D'emploi page 16

signal icon turns off. Then user has to set the time
manually.
** Radio controlled signal will be scheduled to receive every
hour. Signal will stop to received during phone charging.
USB CHARGER FUNCTION
1. Simply plug in the USB cable on the side of the unit to
power up the phone (USB charging cable not included),
capable 5V, and 1000mA current.
2. Place phone alongside in the stand on top.
NOTE!
AC adapter is necessary plug in for phone charger function.
SELECTING TEMPERATURE / ALARM 1 / ALARM
2 / DUAL TIME DISPLAY
1. Press MODE will display the Alarm 1 (AL1) time
2. Press MODE again will display the Alarm 2 (AL2) time
3. Press MODE again will display the Dual Time (DT)
4. Press MODE again will display the temperature (°C/°F)
16
MANUAL TIME SETTING
The system date and time can be set by pressing MODE for
approx. 5 seconds in Time/Temperature display with the
turns off.
SETTING THE DATE AND TIME
1. Press MODE again: the year digits are blinking and can be
set by pressing + or - key.
2. Press MODE again: the month digits are blinking and can
be set by pressing + or - key.
3. Press MODE again: the date digits are blinking and can be
set by pressing + or - key.
4. Press MODE: the hour digits are blinking and can be set
by pressing + or - key.
5. Press MODE again: the minute digits are blinking and can
be set by pressing + or - key.
6. Press MODE one last time: the normal time display appears.
12/24 HOUR TIME DISPLAY
Press + key will toggle the display format between 12 and
24 hours.